Band Remover， 1 Pcs / Set (Unit)

Band Remover Hardness of tip: HRC52-55 Used to remove bands and other bondable attachments..

(2)

Bondage Removing Plier, 1 Pcs / Set (Unit)

Bondage Removing Pliers Hardness of tip: HRC52-55 Used to remove bondage on the crown without any injury on enamel..

(3)

Bracket Removing Plier, 1 Pcs / Set (Unit)

Bracket Removing Pliers Hardness of tip: HRC52-55 Used to remove anterior brackets..

(0)

Cap Removing Plier， 1 Pcs / Set (Unit)

Band Remover Hardness of tip: HRC52-55 Used to remove bands and other bondable attachments..

(4)

Heavy Cutter

Heavy Cutter Hardness of tip: HRC60-65 Cutting edge made by new technology, Used to cut Australia wires, Niti wires, stainless steel wires,  wires diameter up to 0.030" (0.76mm)..

(1)

How Utility Plier， 1 Pcs (Unit) Hardness of tip: HRC52-55 To hold arch wires and guide it into buccal tubes, to hold ligature wires, or to form anterior band

Loop bending plier Hardness of tip: HRC52-55 To make different small loops for multi-loop edgewise arch wires, diameter of loops:2.00/3.20/4.20mm..

(1)

Kim Plier, Hardness of tip: HRC52-55, To bend multi-loop edgewise wires, with cutter on tips

Kim Plier Hardness of tip: HRC52-55 To bend multi-loop edgewise wires, with cutter on tips..

(1)

Loop bending plier， 1 Pcs / Set (Unit)

Loop bending plier Hardness of tip: HRC52-55 To make different small loops for multi-loop edgewise arch wires, diameter of loops:2.00/3.20/4.20mm..

(1)

Multi-fuction Plier, Hardness of tip: HRC52-55,Used to bend, flatten and cut wires

Multi-fuction Plier Hardness of tip: HRC52-55 Used to bend, flatten and cut wires..

(2)

Nance Loop Bending Plier

Nance Loop Bending Plier Hardness of tip: HRC52-55 To make vertical loops of different height along arch wires,3.0/4.0/5.0/6.0mm Wires diameter up to 0.022"(0.56mm) • Extra hard stainless steel • Four step loop forming beaks precision ..

(1)

Niti Cinch Back Pliers, 1 Pcs / Set (Unit)

Niti Cinch Back Pliers Hardness of tip: HRC60-65 Cutting edge made by new technology Used to cinch back distal end of arch wires to avoid any injury of tissue. Niti wires diameter up to 0.021"(0.53mm)..

(1)

Posterior Bracket Removing Plier, 1 Pcs / Set (Unit)

Posterior Bracket Removing Plier Hardness of tip : HRC52-55 Used to Remove posterior brackets..

(1)

Three Jaw Plier, Hardness of tip: HRC52-55, To make V loops and bend archwires. wires diameter up to 0.030"

Three Jaw Plier Hardness of tip: HRC52-55 To make V loops and bend archwires. wires diameter up to 0.030"..

(1)

Torque Pliers, 1 Pcs / Set (Unit)

Torque Pliers Hardness of tip : HV713-856 (HRC60-65) Cutting edge made by new technology. Used in pair to make torque on rectangle wires, thickness of tips : 0.050"(1.27mm)..

(1)

Tweed Loop Plier (To make small loops, distal stops on archwires)

Tweed Loop Pliers Hardness of tip: HV713-856(HRC60-65) To make small loops, distal stops on archwires..

(1)

Weingart Pliers, 1 Pcs / Set (Unit)

Weingart Pliers Hardness: HRC52-55 Used to cinch back distal end of arch wires to avoid any injury of soft tissue..

(1)

Crimpable Hook Pliers , 1 Pcs / Set (Unit)

Crimpable Hook Pliers Hardness of tip: HRC52-55 To fix the crimpable hooks along arch wires..

(1)

Distal End Cutter , 1 Pcs / Set (Unit)

Distal End Cutter  Packing: 1 Pcs / Pack Hardness:HRC60-65 Cutting edge made by new technology, used to cut the long distal end of arch wires, and safety holding the cut part.  Arch wires up to 0.021" x 0.025" (0.53mm x 0.6..

(1)

Distal End Cutter - with flush end , 1 Pcs / Set (Unit)

Distal End Cutter    - with flush end Packing: 1 Pcs / Pack Hardness:HRC60-65 Cutting edge made by new technology, used to cut the distal end of arch wires and safety holding the cut part, the distal end of arch wire will ..

(3)

Light Wire Cutter , 1 Pcs / Set (Unit)

Light Wire Cutter  Packing: 1 Pcs / Pack Hardness:HRC60-65 Cutting edge made by new technology, ligature wires or elastic rings'diameter  Arch wires up to 0.021"(0.30mm) (can not be used for cutting arch wires)..

(1)